Problem with WD Marvel Demo

Questions about Wdmarvel capabilities
tomset
Сообщения: 922
Зарегистрирован: 01 янв 1970, 00:00

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение tomset »

You need to know the structure of WD Marvel HDD.
You have knowledge of him until zero
Explanation of all the nuances that will take many months.
Nor any easy tutorial on this subject no.
locarno
Сообщения: 153
Зарегистрирован: 20 фев 2014, 18:10

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение locarno »

Ok, but when I install RUS windows you can help me (what do in WDMARVEL, instruction's etc.) Or this is too difficult to me ?

Can I write mod02 from working disk to locked disk ?
locarno
Сообщения: 153
Зарегистрирован: 20 фев 2014, 18:10

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение locarno »

How to read MOD 802F in WDMarvel ?
Guy from other forum need this module. He would make fixed *.bin

quote:
fzabkar писал(а):@locarno, the only useful information you have provided is your MOD 02 and ROM dumps. Were you able to retrieve any other MODs from your drive, particularly MOD 802F?

The "WD3200BUDT 02mod unlocked.BIN" which you obtained from some other forum is a bastardised concoction of MOD 0D and the first 3 of 4 sectors of MOD 02. MOD 0D is corrupt -- it appears that all the 00 bytes have been replaced with 20. Moreover, the master password in MOD 02 has been changed to "WD3200BUDT" and the capacity has been reduced to 0 LBAs.

In the absence of more useful information, I propose to edit your own MOD 02, recalculate its checksum, and then use HDDHackr to apply an UNDO.BIN file to your drive. I propose to create this UNDO.BIN file using the MOD OD in your ROM dump plus my edited version of your MOD 02.

Before I try this, can you provide MOD 802F? This will make the procedure much easier and much less risky.
tomset
Сообщения: 922
Зарегистрирован: 01 янв 1970, 00:00

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение tomset »

Most often, module 802F is empty on Jamaica 4k.
Depends on FW.
Read can in the same utility, where the read module 02.
tomset
Сообщения: 922
Зарегистрирован: 01 янв 1970, 00:00

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение tomset »

Russian Win you do not need, you can add Russian encoding in Polish win.
in regional settings
Аватара пользователя
Vlad
Разработчик
Сообщения: 4849
Зарегистрирован: 13 авг 2013, 07:53

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение Vlad »

Откопал я ямайку такую
Это действительно не пароль, не то поведение
Точно помню что попадался винт с такой ошибкой, но я был уверен что это пароль, не помню уже как убрал ее
locarno
Сообщения: 153
Зарегистрирован: 20 фев 2014, 18:10

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение locarno »

What's next ?
tomset писал(а):Most often, module 802F is empty on Jamaica 4k.
Depends on FW.
Read can in the same utility, where the read module 02.
How to read other modules in WDmarvel ?
tomset
Сообщения: 922
Зарегистрирован: 01 янв 1970, 00:00

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение tomset »

locarno!
if Dir - 01 module reads.
That 802F should be in the list of modules.
Otherwise it is necessary to load the utility.
Аватара пользователя
Vlad
Разработчик
Сообщения: 4849
Зарегистрирован: 13 авг 2013, 07:53

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение Vlad »

locarno
Reading and writing system area locked
You do not have enough of knowledge to solve the problem
If you have important data in the drive, refer to specialists
If the data is not needed, just buy a new drive
locarno
Сообщения: 153
Зарегистрирован: 20 фев 2014, 18:10

Re: Problem with WD Marvel Demo on Polish Windows

Сообщение locarno »

No, I don't have important files on HDD.
I want only unlock this HDD.
must be some way to unlock this

@EDIT
My friend tell me this password (WDCWDCWDC) is not active
Ответить