what hardware and software do I need to run WDR???

Questions on purchase wdmarvel
joseph
Сообщения: 1
Зарегистрирован: 31 май 2017, 13:25

what hardware and software do I need to run WDR???

Сообщение joseph »

Before Purchasing I want to make I have the right equipment and software for this program?

Is XP OK?
Аватара пользователя
Vlad
Разработчик
Сообщения: 4815
Зарегистрирован: 13 авг 2013, 07:53

Re: what hardware and software do I need to run WDR???

Сообщение Vlad »

SATA controller in IDE/Compatible mode
Any Windows from XP to 10
Аватара пользователя
Spildit
Сообщения: 240
Зарегистрирован: 02 янв 2016, 09:05
Откуда: Portugal - Europe
Контактная информация:

Re: what hardware and software do I need to run WDR???

Сообщение Spildit »

Try the free DEMO.

If the DEMO works then the full version will work as well.

Also WDR is NOT THE SAME as WDMarvel.

WDR is a "pirated" tool done by a Chinese "Union" that no longer exists and that "compiled" or "created" WDR using HRT 5.0 WD-Marvel tool (stolen "code" and GUI). WDR have "bugs" that were never corrected and doesn't work on modern drives as well.

http://www.hddoracle.com/viewtopic.php? ... 1576#p9323

You really want to use WDMarvel instead.

If you like the DEMO version and if it works fine for you (it can only read) then but the full version so that you can write to the drive.
The HDD Oracle - Platform for OPEN research on Data Recovery.
elevtechlift
Сообщения: 22
Зарегистрирован: 04 май 2020, 03:21

Re: what hardware and software do I need to run WDR???

Сообщение elevtechlift »

Vlad писал(а):SATA controller in IDE/Compatible mode
Any Windows from XP to 10
So does this also apply to the WDMarvel tool? It's any SATA controller, is that right? I have a SATA HDD Docking station from iCAN (Model GDPD07T).
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1392
Зарегистрирован: 01 янв 1970, 00:00
Откуда: Belarus, Baranovichi

Re: what hardware and software do I need to run WDR???

Сообщение SRUTSSSSSSSS80 »

elevtechlift писал(а):
Vlad писал(а):SATA controller in IDE/Compatible mode
Any Windows from XP to 10
So does this also apply to the WDMarvel tool? It's any SATA controller, is that right? I have a SATA HDD Docking station from iCAN (Model GDPD07T).

PCI-SATA
PCI-E -SATA
elevtechlift
Сообщения: 22
Зарегистрирован: 04 май 2020, 03:21

Re: what hardware and software do I need to run WDR???

Сообщение elevtechlift »

SRUTSSSSSSSS80 писал(а):
elevtechlift писал(а):
Vlad писал(а):SATA controller in IDE/Compatible mode
Any Windows from XP to 10
So does this also apply to the WDMarvel tool? It's any SATA controller, is that right? I have a SATA HDD Docking station from iCAN (Model GDPD07T).
PCI-SATA
PCI-E -SATA
So I cannot use the docking station as a substitute for PCI/PCI-e interface? My PC is a Surface Pro 6 and I want to fully understand the hardware and software requirements to be able to use WDMarvel. If so, is there a workaround to this?
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1392
Зарегистрирован: 01 янв 1970, 00:00
Откуда: Belarus, Baranovichi

Re: what hardware and software do I need to run WDR???

Сообщение SRUTSSSSSSSS80 »

Surface Pro 6 - No sata ports (ahci mode/ide mode) available

motherboard sata port - yes, ahci mode/ide mode, no raid
usb<->SATA box - no
PCI-E -SATA-yes (jmb363- ok, ahci mode/ide mode, no raid)
PCI-SATA - yes (for ahci mode/ide mode, no raid)
elevtechlift
Сообщения: 22
Зарегистрирован: 04 май 2020, 03:21

Re: what hardware and software do I need to run WDR???

Сообщение elevtechlift »

SRUTSSSSSSSS80 писал(а):Surface Pro 6 - No sata ports (ahci mode/ide mode) available

motherboard sata port - yes, ahci mode/ide mode, no raid
usb<->SATA box - no
PCI-E -SATA-yes (jmb363- ok, ahci mode/ide mode, no raid)
PCI-SATA - yes (for ahci mode/ide mode, no raid)
I see. I thought since WDMarvel 3.1.1, there's USB support. Did something happen to the USB support? I must have misunderstood something about hardware compatibility for WDMarvel.
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1392
Зарегистрирован: 01 янв 1970, 00:00
Откуда: Belarus, Baranovichi

Re: what hardware and software do I need to run WDR???

Сообщение SRUTSSSSSSSS80 »

It is, but not for repair
elevtechlift
Сообщения: 22
Зарегистрирован: 04 май 2020, 03:21

Re: what hardware and software do I need to run WDR???

Сообщение elevtechlift »

SRUTSSSSSSSS80 писал(а):It is, but not for repair
Thanks for the swift response! If I cannot use USB for repair purposes, then what is it used for specifically? Is the USB read-only or read and write? In my case, I need to somehow rebuild donor PCB's ROM from patient HDD's SA and my first thought is to use WDMarvel.

Patient HDD info
Model: WD10EAVS-00D7B0
PCB: 2060-701537-004 REV A
Ответить