A question

Questions about Wdmarvel capabilities
Аватара пользователя
Vlad
Разработчик
Сообщения: 4815
Зарегистрирован: 13 авг 2013, 07:53

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение Vlad »

Оно Hitachi/Arm7 ?
tehnosoftex
Сообщения: 12
Зарегистрирован: 14 дек 2018, 12:26

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение tehnosoftex »

Thanks for your help, but can I use these files with wd marvel demo to reset password?
Аватара пользователя
Vlad
Разработчик
Сообщения: 4815
Зарегистрирован: 13 авг 2013, 07:53

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение Vlad »

Vlad писал(а):Did you try Clear password method 2 button?
tehnosoftex
Сообщения: 12
Зарегистрирован: 14 дек 2018, 12:26

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение tehnosoftex »

Vlad писал(а):
Vlad писал(а):Did you try Clear password method 2 button?
Yes already tried that, this is the output from the picture.
tehnosoftex
Сообщения: 12
Зарегистрирован: 14 дек 2018, 12:26

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение tehnosoftex »

It has marvel 88i1047-NDB2 on the pcb. I open it and remove the white pad from mcu. It is the same board like here https://www.hddzone.com/images/WD100301.jpg
tehnosoftex
Сообщения: 12
Зарегистрирован: 14 дек 2018, 12:26

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение tehnosoftex »

if it helps I can read the serial flash with a programmer, it has 25q80b from winbond.
Аватара пользователя
Spildit
Сообщения: 240
Зарегистрирован: 02 янв 2016, 09:05
Откуда: Portugal - Europe
Контактная информация:

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение Spildit »

tehnosoftex писал(а):if it helps I can read the serial flash with a programmer, it has 25q80b from winbond.
Yes, please do so.
The HDD Oracle - Platform for OPEN research on Data Recovery.
Аватара пользователя
Vlad
Разработчик
Сообщения: 4815
Зарегистрирован: 13 авг 2013, 07:53

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение Vlad »

Isolate contacts from PCB to the preamp with some plastic card
Power on
SA region editor
Add +1 to all region and Dir addresses
Ok
Power off
Remove isolator
Power on
SA region editor in RAM
Restore all addresses
Reinit module 01
Now you can read password in config editor

But you need full version for this
tehnosoftex
Сообщения: 12
Зарегистрирован: 14 дек 2018, 12:26

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение tehnosoftex »

Vlad писал(а):Isolate contacts from PCB to the preamp with some plastic card
Power on
SA region editor
Add +1 to all region and Dir addresses
Ok
Power off
Remove isolator
Power on
SA region editor in RAM
Restore all addresses
Reinit module 01
Now you can read password in config editor

But you need full version for this
I can buy for a month, but it will works for sure?
Аватара пользователя
manager_lg
Сообщения: 146
Зарегистрирован: 03 ноя 2017, 23:38

Re: try to reset password at WDC WD60EZRZ-00GZ5B1

Сообщение manager_lg »

tehnosoftex писал(а):
I can buy for a month, but it will works for sure?
Sure, you bet.
Ответить