A question

Questions about Wdmarvel capabilities
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1482
Зарегистрирован: 01 янв 1970, 00:00
Откуда: USxxR

Re: A question

Сообщение SRUTSSSSSSSS80 »

check modules by heads for correct reading and CS
pujosm
Сообщения: 8
Зарегистрирован: 07 июн 2018, 14:57

Re: A question

Сообщение pujosm »

Thank you very much for your answers.

If I find out, I'll post it.
pujosm
Сообщения: 8
Зарегистрирован: 07 июн 2018, 14:57

Re: A question

Сообщение pujosm »

On all 3 drives mod 6F Overlay and mod 24 SMART Log have invalid CRC. Must be normal (1 drive can cut head (from 2013), 2 drives not (from 2017 and 2018)
Other modules all are ok.
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1482
Зарегистрирован: 01 янв 1970, 00:00
Откуда: USxxR

Re: A question

Сообщение SRUTSSSSSSSS80 »

this is normal for these modules, recalculate the CRC, they are updated online and the CRC is always wrong.

04 and other modules normal in all heads? read head 0/1

WD4000FYYZ-01UL1B1-07.J2E

what is the size of the 05 module?
try to register new 04 and 05 module in dir
pujosm
Сообщения: 8
Зарегистрирован: 07 июн 2018, 14:57

Re: A question

Сообщение pujosm »

All modules are normal on both heads.

05 is the same size as 04 = 28806

I tried 04 and 05 from the other drive with working head cut, sizes 31686
Registered correctly in dir, read both heads ok. But still same error

I tested the 28806 modules on the good drive instead of 31686 modules.
When head cut, there is no such error, so I don't think it's mod 04 or 05 that causes the error.
It's maybe some kind of head cut lock, I see it in all newer Vivaldi and Kojn_RE drives from 2017 or newer.
I need to change some other modules and try.
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1482
Зарегистрирован: 01 янв 1970, 00:00
Откуда: USxxR

Re: A question

Сообщение SRUTSSSSSSSS80 »

as an option to look at which modules change when chopping the head, and throw them from another HDD
BeZnojeK
Сообщения: 3
Зарегистрирован: 20 ноя 2022, 16:29
Откуда: Kyrgyzstan

Re: A question

Сообщение BeZnojeK »

Hi all. Sorry for bad english.

Tell me, does the paid version of the program support the "WDC WD121PURP-85B5SY0" (fw ver - 82.00A82) hard drive?

Problem - hard drives of the model indicated above were bought by mistake, but HUH721212ALE600 were needed - now the video server does not accept wd purple.

Can the program change the model in the ROM so that the video server accepts the wd purple for HUH721212ALE6?
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1482
Зарегистрирован: 01 янв 1970, 00:00
Откуда: USxxR

Re: A question

Сообщение SRUTSSSSSSSS80 »

no it doesn't work with hitachi
BeZnojeK
Сообщения: 3
Зарегистрирован: 20 ноя 2022, 16:29
Откуда: Kyrgyzstan

Re: A question

Сообщение BeZnojeK »

SRUTSSSSSSSS80 писал(а): 23 ноя 2022, 19:25 no it doesn't work with hitachi
Thanks a lot for your answer! although I have already purchased a plus license for 1 month :D
I'll go look for the programs you mentioned. Thank you!
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1482
Зарегистрирован: 01 янв 1970, 00:00
Откуда: USxxR

Re: A question

Сообщение SRUTSSSSSSSS80 »

It was possible to check in the Demo version, if it defines a family, then the program supports it.
Ответить