Problem with WD Marvel Demo

Questions about Wdmarvel capabilities
Afterek
Сообщения: 18
Зарегистрирован: 01 июн 2020, 01:40

Re: Problem with WD Marvel Demo

Сообщение Afterek »

Vlad писал(а):PList nave no enough space to hold ALL tracks
Show the view Selfscan log window
After making again SS, maybe someone understands something? 5 heads bad, one good?
What I done bad?

Изображение
Аватара пользователя
Vlad
Разработчик
Сообщения: 4815
Зарегистрирован: 13 авг 2013, 07:53

Re: Problem with WD Marvel Demo

Сообщение Vlad »

Write original E6 from backup
Restore SelfScan script from log
Prepare SA and run SelfScan

You trying to run empty stub instead script
Afterek
Сообщения: 18
Зарегистрирован: 01 июн 2020, 01:40

Re: Problem with WD Marvel Demo

Сообщение Afterek »

Vlad писал(а):Write original E6 from backup
Restore SelfScan script from log
Prepare SA and run SelfScan

You trying to run empty stub instead script
This working :D Now SS looks completely different and working with "dual buffer write", thanks Vlad, I hope this will works. Simply I didn't know how should looks SS script :)
Afterek
Сообщения: 18
Зарегистрирован: 01 июн 2020, 01:40

Re: Problem with WD Marvel Demo

Сообщение Afterek »

All working ok, except two tracks on head 4... All added to P-list, but with HDD scan or Victoria disk is blocked and scanning is broken. I was trying adding to G-list too (message: cannot hide this track), only depop of head no.4 makes disk possible for scan. How can I turn off these two tracks only from scans and writing simply? Problem exists on only these two tracks, rest of disk is great, no problem now after completed SS.
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1390
Зарегистрирован: 01 янв 1970, 00:00
Откуда: Belarus, Baranovichi

Re: Problem with WD Marvel Demo

Сообщение SRUTSSSSSSSS80 »

Вы формат + пересчёт транслятора делали после добавления дефектов в П лист?
а зоной отключить пробовали?
Afterek
Сообщения: 18
Зарегистрирован: 01 июн 2020, 01:40

Re: Problem with WD Marvel Demo

Сообщение Afterek »

SRUTSSSSSSSS80 писал(а):Вы формат + пересчёт транслятора делали после добавления дефектов в П лист?
а зоной отключить пробовали?
Format - yes, translator no, but exactly I turned off this zone, 50GB less from disk, but now loks like all ok, now I'm still testing with CMD LBA test.
Layer
Сообщения: 1
Зарегистрирован: 29 июл 2020, 02:51

Re: Problem with WD Marvel Demo

Сообщение Layer »

Hello everyone !

I have a prob with WDMarvel Demo, I wanted to view ATA password from RAM => Edit Config in RAM and I got the following error :

Код: Выделить всё

An exception has occurred!
Type: EFCreateError App version: 4.0.3
Message: Cannot create file J:\WDMarv_demo\Log.rtf
Marvel Demo is installed in J:\WDMarv_demo\
My OS : Win XP SP2
SSD model used : WDC WD10JPVX-22JC3T0

Изображение

Thanx !
Аватара пользователя
SRUTSSSSSSSS80
Сообщения: 1390
Зарегистрирован: 01 янв 1970, 00:00
Откуда: Belarus, Baranovichi

Re: Problem with WD Marvel Demo

Сообщение SRUTSSSSSSSS80 »

Прочитайте справку (txt) к программе, проблема на вашей стороне, программе не разрешена запись в текущую папку - антивирус/ права администратора и т.д. Об чём она и сообщила.
elevtechlift
Сообщения: 22
Зарегистрирован: 04 май 2020, 03:21

Unsure if WDMarvel can't read the modules in the SA or something in the SA for ROM rebuild has problems

Сообщение elevtechlift »

I'm not sure what's happening but WDMarvel isn't able to read my WD10EAVS HDD's SA modules. This is what I currently see:

Код: Выделить всё

12/3/2020 9:23:25 PM: Reading modules...
12/3/2020 9:23:26 PM: Error reading module ID109, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID102, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID103, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID104, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID105, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID106, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID107, state - 3743
12/3/2020 9:23:26 PM: Successfully read 0 modules
When I check out "Modules operations" under "S/A operations", this is what I see in the logs when I performed "Check all modules" under "Modules":

Код: Выделить всё

12/3/2020 9:33:00 PM: Error reading module Dir, state - SERVO_ERROR_CODE_BASE_SvirActSync
12/3/2020 9:36:32 PM: Looking for modules, found 7
12/3/2020 9:36:32 PM: Checking modules ...
12/3/2020 9:36:33 PM: Successfully checked 7 modules
12/3/2020 9:36:45 PM: Reading modules...
12/3/2020 9:36:46 PM: Successfully read 7 modules
I wonder if there are other ways to read the SA modules or I should rebuild the SA modules. If I have to rebuild the SA modules, how should I do it (aside from obtaining full version of the software)? Should I read the ROM modules and write them to the SA or should I download from HDDGURU or equivalent site and rebuild both ROM and SA modules? I came across this collection of firmwares on HDDGURU.
elevtechlift
Сообщения: 22
Зарегистрирован: 04 май 2020, 03:21

Re: Unsure if WDMarvel can't read the modules in the SA or something in the SA for ROM rebuild has problems

Сообщение elevtechlift »

elevtechlift писал(а): 28 ноя 2020, 05:34 I'm not sure what's happening but WDMarvel isn't able to read my WD10EAVS HDD's SA modules. This is what I currently see:

Код: Выделить всё

12/3/2020 9:23:25 PM: Reading modules...
12/3/2020 9:23:26 PM: Error reading module ID109, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID102, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID103, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID104, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID105, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID106, state - 3743
12/3/2020 9:23:26 PM: Error reading module ID107, state - 3743
12/3/2020 9:23:26 PM: Successfully read 0 modules
When I check out "Modules operations" under "S/A operations", this is what I see in the logs when I performed "Check all modules" under "Modules":

Код: Выделить всё

12/3/2020 9:33:00 PM: Error reading module Dir, state - SERVO_ERROR_CODE_BASE_SvirActSync
12/3/2020 9:36:32 PM: Looking for modules, found 7
12/3/2020 9:36:32 PM: Checking modules ...
12/3/2020 9:36:33 PM: Successfully checked 7 modules
12/3/2020 9:36:45 PM: Reading modules...
12/3/2020 9:36:46 PM: Successfully read 7 modules
I wonder if there are other ways to read the SA modules or I should rebuild the SA modules. If I have to rebuild the SA modules, how should I do it (aside from obtaining full version of the software)? Should I read the ROM modules and write them to the SA or should I download from HDDGURU or equivalent site and rebuild both ROM and SA modules? I came across this collection of firmwares on HDDGURU.

I wonder what happened to Vlad's response to my post. I don't see it anymore and is there anyone that can help me on what to do in this situation?
Ответить